PLEASE READ ALL DETAILS BEFORE ORDERING
Current estimated build/ship time is 2-3 weeks from purchase date.
Kit includes:
- Driver & passenger side engine perch mounts that bolt to block
- Slide adjusting plates
- Hardened steel mounting hardware
- 90a Polyurethane black bushings
Specs:
- Raw steel
- 100% water jet cut & precision welded
- Adjustable design for even more fine tuning engine placement
- Directly bolts to engine block without the need for factory motor mounts
- Direct fit for Crown Vic swapped f-series Ford trucks
- These mounts will sit a small block Ford in factory offset position aligning engine with firewall and trans tunnel in cab
- Adaptable with lift spacers for use of all factory oil pans (front, dual & rear sump)
- Able to use factory frame shifter linkage 3 on the tree and factory trans x member
- If you need taller mounts to fit a front sump truck pan without the need for lift spacers please add a note to your order
Notes:
If you are installing a small block Ford 302 from a 90's truck or car, you may need to grind a small "V" notch into the mount block plate to fit around factory block casting. This casting is only present on some last generation small block engines.
The Crown Victoria suspension swap is a custom install, some fitments may vary. These mounts are designed for Ford f-series trucks with 03+ Ford Crown Victoria suspension swap. New adjustable design will allow for mount upright supports to be positioned anywhere from the rear block bolt hole to the front block bolt hole. These mounts were originally designed for 60's and 70's model year f-series trucks.
Lifetime Warranty:
All Outcast AutoWorks built products are backed by a lifetime warranty including brackets, hardware and bushings! If our parts don't last forever, we want to know about it!
Guaranteed Fit policy:
Buy with confidence! Here at Outcast, we take pride in our products and realize every project is unique. We want to offer parts that exceed expectations and above all, fit. When you purchase from us, we are committed to providing parts that fit YOUR project. We wont stop until you are 100% satisfied. If changes or part exchanges need to be made, we've got you covered.
Returns are accepted as long as the item has NOT been painted, powder coated, cut or re-welded.